Good Workability Alcoholic Acid Alkyd Enamel Primer Coat
1.Product Basic Info:
FNAH-602 Alkyd Enamel
May be applied by airless spray, air spray, brush, or roller.
0.09kg/m2/30μm 0.067 L/m2/30μm
Depending on the surface treatment, environment and application methods.
Dry To Touch(hrs)
Dry film thickness:30μm /coat
Wet film thickness: 60μm/coat
¶Dry quickly at low temperature or in winter;
¶Very good rust and corrosion resistance;
¶Good adhesion to rusty surface;
¶Compatible with all kinds of finishes.
¶Used for steel surface.
¶As topcoat for initial painting of newly-built steel beam, or for re-painting or maintenance of the steel beam in use.
¶ The preceding primer surface must be clean, dry and free of contaminants.
¶ Pay attention to the coating interval to the primer.
3.Substrate : Bare steel or old paint film.
4.Primer Coat : Alkyd Primer, or refer to our coating system.
The following shall be guaranteed during any paint applications:
¶Avoid skin and eye contact.
¶In case of skin or eye contact, flush with large amount of water and immediately get medical attention.
¶Assure well-ventilated working place.
¶Take precautions of the risks of fire or explosion.
¶Observe all health and safety regulations on site.
¶The information given on this technical data sheet is correct to the best of our knowledge. In consideration of the application conditions of the product are beyond our control, so no guarantee is involved herein, namely, we are responsible for the buyers only in terms of their selecting a product. All data must be clarified from our company because of the constantly improvement of our product and its manufacturing process.